---
title: Add/View a Remote Network
slug: addview-a-remote-network
docTags: 
createdAt: 2022-10-12T20:25:05.000Z
---

You can add and view remote networks. 

- To add a new network, click the **Add **icon from [Edge Remote](docId\:sxUfHtL3jd491lJnMtr9V).
- To view/update a network, click the network name from [Edge Remote](docId\:sxUfHtL3jd491lJnMtr9V).

![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/21Uwj9A0HbXjKp1JIyqbA_image.png "Edge Remote Networks: Network View")

:::hint{type="info"}
**Note**: Starting with Manufacturing Connect version 2.10.0, an IPv4 address in the format `0.xxx.xxx.xxx/8` is no longer allowed due to RFC standards.
:::

| **Action**                                                                                                                     |
| ------------------------------------------------------------------------------------------------------------------------------ |
| \[1] Enter the network name.                                                                                                   |
| \[2] Select **IPv4 **or** IPv6**.                                                                          |
| \[3] Enter the subnet mask.<br />* IPv4 Example: `xxx.xxx.0.0/24`
* IPv6 Example: `fd97:531a:ce26:ab11::/64`                   |
| \[4] Enter the gateway address.                                                                                                |
| \[5] Review the capacity for activated devices on the network (available for Manufacturing Connect version 2.15.0 and later).  |