---
title: Configure a Modem
slug: manufacturing-connect-edge-v2/configure-a-modem
docTags: 
createdAt: 2022-09-27T13:21:19.000Z
---

If your device supports LTE, a Modem Configuration section appears by navigating to **System **>** Network** and clicking the **WWAN **tab. Once you configure the modem, the information appears on the *Info *pane.

# Before You Begin

Make sure your configuration is using the same network on which your device is located.

# Configure a Modem

**To configure a modem:**

1. Navigate to **System ***> ***Network**. 
2. Click the **WWAN **tab. 
3. Confirm that there are configurations available.
4. Click the **Edit **icon.
   The *Update* *Modem Config* dialog box appears. 
5. Enter an access point name in the **APN **field. 
6. Click **Submit**. 
   The APN name appears in the *Assigned APN*** **and the *Requested APN*** **field.