---
title: Configure the Network Settings
slug: manufacturing-connect-edge-v2/configure-the-network-settings
docTags: 
createdAt: 2022-09-27T13:21:32.000Z
---

You can configure the network settings by navigating to **System **>** Network** > **Configure**. 

![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/vg78WN1ENJhafotphuuNY_image.png "System Network Configure tab")

# Host Information

In the *Friendly Name* field, update the host friendly name and click **Change**. You can verify the updated friendly name by clicking the **Overview **tab and reviewing the *Host Information* section. 

# Timezone

- In the *Country *field, update the country and click **Change**. Refer to the list of [country codes for ISO 3166](https://en.wikipedia.org/wiki/List_of_ISO_3166_country_codes) when choosing the appropriate country.
- In the Timezone field, use the drop-down list to update the time zone and click **Change**. You must reboot the device for the time zone change to take effect. 

You can verify the updated time zone by clicking the **Overview **tab and reviewing the *Host Information* section. 

# Docker Interface

You can modify the Docker binding IP address range for your system. Changing the Docker binding IP restarts the Docker service. All deployments restart.

In the *Docker Binding IP* field, enter an IP address range and click **Change**. For example: `10.30.50.1/24`. 

You can verify the updated Docker binding IP address range by clicking the **Overview **tab and reviewing the *Docker Interface* section.