---
title: Rise and Fall
slug: manufacturing-connect-edge-v2/rise-and-fall
docTags: 
createdAt: 2024-08-08T21:46:32.013Z
---

The **Rise and Fall** processor calculates the difference in upper and lower thresholds between consecutive values.

# Rise and Fall Overview

- **Rise**: Once you enter a lower threshold and an upper threshold, this function will show you the timestamp at which the current value starts to rise from the lower threshold.
- **Fall**: Once you enter a lower threshold and an upper threshold, this function will show you the timestamp at which the current value starts to fall from the upper threshold.
- Also provides rise time and fall time in seconds.

# Rise and Fall Parameters

| **Parameters** | **Details**                                                                                                         |
| -------------- | ------------------------------------------------------------------------------------------------------------------- |
| Kpi            | This parameter allows you to specify whether you want to calculate the rise, fall, or both for the given data.
 |
| Upper          | This is the value above which the data is considered to be rising or falling.                                       |
| Lower          | This is the value below which the data is considered to be rising or falling.                                       |
| Tolerance      | Any changes in the data that are under this tolerance will be ignored when calculating the rise and fall.           |

![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/eSYF_CnMJ0-hnwJkmu3sG_image.png "Rise and Fall Parameters")

:::hint{type="info"}
**Note: **When creating an analytics flow with *Rise and Fall *processor, refer the [Use the Rise and Fall Function](docId\:GKh8JSZfyTPtI6WQPSUmh) guide for more details.
:::