Configure the CAN Interface

you can configure the can interface and the slcan ttyacm0 or slcan ttyacm1 interface, or both, by navigating to system > info from the can interface section you only need to set the configuration once before you begin before completing these steps, make sure you do the following use the hpe el300 device with can bus module (atmel chipset) acquire sufficient socketcan / can bus knowledge configure the can interface to configure the can interface in manufacturing connect edge, navigate to system the info pane appears scroll to the can interface section, and click configure for the slcan ttyacm0 or sclan ttyacm1 interface check the open check box select 1000 from the can speed kbit/s drop down list, and then click save