AB Flex Serial (Gen1)
Review the following information for setting up and configuring the AB Flex Serial (Gen1) driver.
Compatibility parameter | Compatible items |
|---|---|
Driver type | Serial |
Validated devices/series | FlexLogix When configuring tags for this driver, you must enter the case-sensitive register name exactly as it is defined in the PLC. See the Free Tags section below to learn more. |
To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub
- Step 3: Configure the List of Registers
Refer to the following parameters.
Communication mode: DF1 No Handshake protocol 19200, None, 8, 1 (default). Error Check: BCC, Station Address: 1
Parameter | Value |
|---|---|
Type | Allen Bradley |
Driver | AB Flex Serial (Gen1) |
Communication Port | Local Serial connection file path |
Data Bits | 8 |
Baud Rate | 19200 |
Parity | Even, Odd, None |
Stop Bits | 1 |
- bool
- sint
- int
- dint
- real
- lint