ELC Serial (Gen1)
Review the following information for setting up and configuring the ELC Serial (Gen1) driver.
Compatibility parameter | Compatible items |
|---|---|
Driver type | Serial |
Validated devices/series |
To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub
- Step 3: Configure the List of Registers
To configure your device:
1. Note down the following information and refer to it when needed.
Device: Cutler-Hammer ELC-PV28NNDR
Communication I/F: RS232, refer to the following figures.
![ELC Serial (Gen1) reference [1]](https://images.archbee.com/SSUUxKZUk9bFTEPNn_6Zo/S0CKD5lAmibbvuwri6spB_image.png?format=webp "ELC Serial (Gen1) reference [1]")
![ELC Serial (Gen1) reference [2]](https://images.archbee.com/SSUUxKZUk9bFTEPNn_6Zo/4jK6p-X6ePRP-LbNWKxY2_image.png?format=webp "ELC Serial (Gen1) reference [2]")
2. Launch ELCSoft v2.07 software, Options > Communication Setting.
3. Click Communication > Transfer Setup.
4. Read from PLC to PC.
Parameter | Value |
|---|---|
Type | Cutler-Hammer |
Driver | ELC Serial (Gen1) |
Communication Port | Local Serial connection file path |
Data Bits | 7 |
Baud Rate | 9600 |
Parity | Even, Odd, None |
Stop Bits | 1 |
Name | Value Type | Address Format | Min Address | Max Address | Description |
|---|---|---|---|---|---|
C_Bit | bit | DDD | 0 | 255 |
|
M | bit | DDDD | 0 | 4095 |
|
S | bit | DDDD | 0 | 1023 |
|
T_Bit | bit | DDD | 0 | 255 |
|
X | bit | OOO | 0 | 255 |
|
Y | bit | OOO | 0 | 255 |
|
T | word | DDD | 0 | 255 |
|
D | word | DDDDD | 0 | 11999 |
|
C_32Bit | dword | DDD | 200 | 255 |
|
C | word | DDD | 0 | 199 |
|