Mitsubishi A Series Serial
Review the following information for setting up and configuring the Mitsubishi A Series Serial driver.
Compatibility parameter | Compatible items |
|---|---|
Driver type | Serial |
Validated devices/series | A Series models:
|
Replaces Gen 1 driver(s) |
To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub
- Step 3: Configure the List of Registers
Parameter | Value |
|---|---|
Type | Mitsubishi |
Driver | Mitsubishi A Series Serial |
Device File | The file of the serial port you are using |
Baud Rate | Select one of the following:
|
Data Bits | Select one of the following:
|
Stop Bits | Select one of the following:
|
Parity | Select one of the following:
|
Plc Type | Select one of the following:
|
Note: The address format in this Gen 2 driver is different from the replaced Gen 1 drivers for the same device.
Name | Value Types | Address Format | Min Address | Max Address | Description |
|---|---|---|---|---|---|
X | bit | HHH | 0 | 2047 | Input Relay |
Y | bit | HHH | 0 | 2047 | Output Relay |
M | bit | DDDD | 0 | 2047 | Internal Relay |
B | bit | HHH | 0 | 1023 | Link Relay |
F | bit | DDDD | 0 | 1023 | Annunciator |
R | word | DDDDD | 0 | 65535 | File Register |
W | word | HHH | 0 | 1023 | Link Register |
D | word | DDDD | 0 | 1023 | Data Register |
CV | word | DDDD | 0 | 4095 | Counter Memory |
TV | word | DDD | 0 | 255 | Timer Memory |