MTConnect Ethernet (Gen1)
Review the following information for setting up and configuring the MTConnect Ethernet (Gen1) driver.
Compatibility parameter | Compatible items |
---|---|
Driver type | Ethernet |
Validated devices/series | Devices that support the MTConnect standard |
To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub
- Step 3: Configure the List of Registers
If the device is configured for Ethernet access, find its network parameters. Otherwise, use PLC software on your computer to configure your device for Ethernet access.
Parameter | Value |
---|---|
Type | MTConnect Ethernet |
Driver | MTConnect Ethernet (Gen1) |
Network Address | The device address you defined during Step 1 |
Port | 47808 |
When you Add Tags to the connected device, select the name R and value type raw, and then configure the remaining parameters.
You can also browse for tags to add to this device. See Browse Tags.