IEC60870-5-102 Ethernet

6 min

Review the following information for setting up and configuring the IEC60870-5-102 Ethernet driver.

Manufacturing Connect Edge Compatible Series

Compatibility parameter	Compatible items
Driver type	Ethernet
Device standard	IEC 60870-5-102

To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:

Step 1: Set up and Configure the PLC Device

Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub

Step 3: Configure the List of Registers

Step 1: Set up and Configure the PLC Device

If the device is configured for Ethernet access, find its network parameters. Otherwise, use software on your computer to configure the device for Ethernet access.

Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub

Configure the following parameters when you Connect a Device with this driver. Update default values to the specific setup of your device.

Parameter	Value
Type	IEC
Driver	IEC60870-5-102 Ethernet
Network Address	The device address you defined in Step 1
Network Port	2404
Asdu Addr Size	2
Link Address	3

Step 3: Configure the List of Registers

When you Add Tags to the connected device, see the following Register Table and Tag Parameters sections.

See the following additional resources if necessary:

Organize Device and Tag Data by Using Metadata

Tag Formula Variables

Register Table

Name	Value Types	Access Types	Address Format	Min Address	Max Address	Description
M_SP_TA_2	bit	R/W	DDDddd	0	255999	Single point information
M_IT_TA_2	word	R/W	DDDddd	0	255999	Accounting integrated totals, four octets each
M_IT_TB_2	word	R/W	DDDddd	0	255999	Accounting integrated totals, three octets each
M_IT_TC_2	word	R/W	DDDddd	0	255999	Accounting integrated totals, two octets each
M_IT_TD_2	word	R/W	DDDddd	0	255999	Periodically Reset Accounting integrated totals, four octets each
M_IT_TE_2	word	R/W	DDDddd	0	255999	Periodically Reset Accounting integrated totals, three octets each
M_IT_TF_2	word	R/W	DDDddd	0	255999	Periodically Reset Accounting integrated totals, two octets each
M_IT_TG_2	word	R/W	DDDddd	0	255999	Operational integrated totals, four octets each
M_IT_TH_2	word	R/W	DDDddd	0	255999	Operational integrated totals, three octets each
M_IT_TI_2	word	R/W	DDDddd	0	255999	Operational integrated totals, two octets each
M_IT_TK_2	word	R/W	DDDddd	0	255999	Periodically Reset Operational integrated totals, four octets each
M_IT_TL_2	word	R/W	DDDddd	0	255999	Periodically Reset Operational integrated totals, three octets each
M_IT_TM_2	word	R/W	DDDddd	0	255999	Periodically Reset Operational integrated totals, two octets each
C_RD_NA_2	custom	R/W	D	1	1	Read manufacture and product specification
C_TI_NA_2	custom	R/W	D	1	1	Read current system time of integrated total DTE
C_SP_NA_2	custom	R/W	DDD	0	255	Read record of single-point information with time tag
C_SP_NB_2	custom	R/W	DDD	0	255	Read record of single-point information with time tag of a selected time range
C_CI_NA_2	custom	R/W	DDD	0	255	Read accounting integrated totals of the oldest integration period
C_CI_NE_2	custom	R/W	DDD	0	255	Read periodically reset accounting integrated totals of the oldest integration period
C_CI_NI_2	custom	R/W	DDD	0	255	Read operational integrated totals of the oldest integration period
C_CI_NN_2	custom	R/W	DDD	0	255	Read periodically reset operational integrated totals of the oldest integration period
C_CI_NB_2	custom	R/W	DDDSSSEEE	0	255255255	Read accounting integrated totals of the oldest integration period and of a selected range of addresses
C_CI_NF_2	custom	R/W	DDDSSSEEE	0	255255255	Read periodically reset accounting integrated totals of the oldest integration period and of a selected range of addresses
C_CI_NK_2	custom	R/W	DDDSSSEEE	0	255255255	Read operational integrated totals of the oldest integration period and of a selected range of addresses
C_CI_NO_2	custom	R/W	DDDSSSEEE	0	255255255	Read periodically reset operational integrated totals of the oldest integration period and of a selected range of addresses
C_CI_NR_2	custom	R/W	DDDSSSEEE	0	255255255	Read accounting integrated totals of a selected time range and of a selected range of addresses
C_CI_NS_2	custom	R/W	DDDSSSEEE	0	255255255	Read periodically reset accounting integrated totals of a selected time range and of a selected range of addresses
C_CI_NT_2	custom	R/W	DDDSSSEEE	0	255255255	Read operational integrated totals of a selected time range and of a selected range of addresses
C_CI_NU_2	custom	R/W	DDDSSSEEE	0	255255255	Read periodically reset operational integrated totals of a selected time range and of a selected range of addresses

Tag Parameters

Name: Select a register name from the drop-down list. The available options depend on the names in the register table.

Value Type: Select a data type from the drop-down list. The available options depend on the register name selected.

Polling Interval: Enter a value in seconds. This determines how often the tag should poll the register for data.

Tag Name: Enter a name for the tag.

Description (Optional): Enter a description for the tag.

Address: Enter a tag address. The value must in the decimal format, within the allowed min/max range. Omit the leading zeros. The device might use the decimal (D), hexadecimal (H), or octal (O) address format. See the Register Table at the bottom of the dialog box. For Bit tags, append the bit address without the bit separator. The lowercase letters in the address format indicate how many digits you should enter in the Bit address.

Start Date: Enter a start date.

End Date: Enter an end date.

Tag Formula: Enter a formula for the tag to process the generated data. Two variables are permitted: value (current tag value) and timestamp (current tag UNIX time in milliseconds). The following math functions are available:

sqrt

power: power(x) performs the operation 10^x.

log: log(x) is the natural logarithm (the logarithm is in base e).

exp: exp(x) performs the operation e^x.

Only Publish on Change of Value: Select the checkbox to customize NATS messages to be published only when the value parameter changes from a previous value to a new one. Change of Value only applies to boolean, numeric (such as int or float), and simple string data types. It does not apply to complex types, such as JSON or array. Poll-once topics will not be affected by Change of Value settings. These topics will still only see a single message.

Meta Data: Metadata summarizes basic information about data. This feature allows you to define key-value pair data for the device output payload later on. It can then be used to find, use, and reuse particular instances of data.

Note: If you use special characters in meta data key names, the special characters are replaced with underscore characters in the payload. This can cause two key names to be combined into one. For example, configuring the key names a**b and a&&b will cause only one key name to be created (a__b).