Sick Flexi Serial (Gen1)
Review the following information for setting up and configuring the Sick Flexi Serial (Gen1) driver.
Compatibility parameter | Compatible items |
|---|---|
Driver type | Serial |
Validated devices/series | Sick Flexi FX3-CPU1 |
To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub
- Step 3: Configure the List of Registers
To configure your device:
Note down the following information and refer to it when needed. Device: Sick Flexi FX3-CPU1 Communication I/F: RS232. Refer to the following figure.
Reference image of device- Launch the Flexi Soft Designer v2.01.0 software and click Com Settings.
- Edit the connection profile.
- Check COM auto-detection.
- Test the connection.
- Click Connect.
Parameter | Value |
|---|---|
Type | Sick Flexi |
Driver | Sick Flexi Serial (Gen1) |
Data Bits | 8 |
Baud Rate | 115200 |
Parity | Even, Odd, None |
Stop Bits | 1 |
Station | 1 |
Communication Port | Local Serial connection file path |
Name | Value Type | Address Format | Min Address | Max Address | Description |
|---|---|---|---|---|---|
I | bit | DDo | 0 | 127 | Input |
Q | bit | DDo | 0 | 127 | Output |
Logic result | bit | DDo | 0 | 197 | Logic Result |
RS232 to Flexi soft_Bit | bit | Do | 0 | 37 |
|
Flexi soft to RS-232_Bit | bit | DDo | 0 | 997 |
|
Module Status Bit Array_Bit | bit | DDo | 0 | 597 |
|
Operating Data Block_bit | word | Do | 0 | 97 |
|
Configuration CRCs_Bit | bit | DDo | 0 | 197 |
|
CPU Module Type Key_Bit | bit | DDo | 0 | 177 |
|
Extension Modules Type_Bit | bit | DDDo | 0 | 3377 |
|
Extension Modules Type | word | DDD | 0 | 336 |
|
CPU Module Type Key | word | DD | 0 | 16 |
|
Configuration CRCs | word | DD | 0 | 18 |
|
Operating Data Block | word | D | 0 | 8 |
|
Module Status Bit Array | word | DD | 0 | 58 |
|
Flexi soft to RS-232 | word | DD | 0 | 98 |
|
RS-232 to Flexi soft | word | O | 0 | 2 |
|