Siemens S7-200 Ethernet (Gen1)
Review the following information for setting up and configuring the Siemens S7-200 Ethernet (Gen1) driver.
Compatibility parameter | Compatible items |
|---|---|
Driver type | Ethernet |
Validated devices/series | S7-200 |
To set up and configure this device in Manufacturing Connect Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Manufacturing Connect Edge DeviceHub
- Step 3: Configure the List of Registers
If the device is configured for Ethernet access, find its network parameters. Otherwise, use PLC software on your computer to configure your device for Ethernet access.
Parameter | Value |
|---|---|
Type | Siemens |
Driver | Siemens S7-200 Ethernet (Gen1) |
Network Address | The device address you defined in Step 1 |
Port | 102 |
Slot | 512 |
Name | Value Type | Address Format | Min Address | Max Address |
|---|---|---|---|---|
I | bit, byte, sint, word, int, dword, dint, real | DDo | 0 | 317 |
Q | bit, byte, sint, word, int, dword, dint, real | DDo | 0 | 317 |
AI | byte, sint, word, int, dword, dint, real | DD | 0 | 31 |
AQ | byte, sint, word, int, dword, dint, real | DD | 0 | 31 |
M_Bit | bit | DDo | 0 | 317 |
V_Bit | bit | DDDDo | 0 | 20477 |
S_Bit | bit | DDo | 0 | 287 |
SM_Bit | bit | DDDo | 0 | 5497 |
T_Bit | bit | DDD | 0 | 255 |
C_Bit | bit | DDD | 0 | 255 |
M | byte, sint, word, int, dword, dint, real | DD | 0 | 31 |
S | byte, sint, word, int, dword, dint, real | DD | 0 | 31 |
SM | byte, sint, word, int, dword, dint, real | DDD | 0 | 549 |
T | dword | DDD | 0 | 255 |
C | word | DDD | 0 | 255 |
HC | dword | D | 0 | 5 |
V | byte, sint, word, int, dword, dint, real, string | DDDD | 0 | 2047 |